Even if your phone is water-resistant, water can still damage parts like the speakers. Water getting into your phone’s speaker can make the sound muffled and affect your calls or music. Fortunately, you can follow some simple phone repair tips to get the water out of your phone speaker.
First, you must turn off your phone right away and don’t plug it in until it’s fully dry to avoid damage. Dry visible water with a cloth and remove any liquid from the ports using a cotton swab. You can use a vacuum on a low setting to remove water from tight spaces but don’t use a blow dryer. Play low-frequency sounds to shake out any remaining water, or use a water-eject app. For serious cases, place your phone with silica gel in a sealed container for 24-48 hours. If problems persist, contact a phone repair store.
Easy Phone Repair Tips To Eject Water From Mobile Speakers
Follow these simple steps to help your phone sound better after getting wet.
Turn Off Your Phone
First things first, turn off your phone immediately. If there’s water in your phone, don’t plug it into a charger until you’re sure there’s no moisture around the charging port. Plugging in a wet phone could cause a short circuit, which might damage your phone beyond just the speaker.
Dry Off Any Visible Water
Start by getting rid of any water you can see. Phone repair experts recommend using a microfiber cloth or any lint-free cloth to wipe off the water. This is also a good time to clean your phone.
Don’t forget the inside! If possible, remove the SIM card (if you have one) and the battery (if your phone model allows). Dry both parts thoroughly. Make sure to soak up any liquid from ports, cracks, and crevices. A cotton swab can help you reach tight spaces. You can also tap your phone gently with the ports and speaker facing down to shake out any water inside.
Suck the Water Out
If you think there’s still water inside your phone, try using a vacuum to get it out. Car vacuums are ideal since they have weaker suction, but a regular vacuum on a low setting works too. Use a small nozzle attachment for the best results.
Avoid using a blow dryer. While it might dry out the water, the heat can damage your phone.
Play Low-Frequency Sounds
After removing visible water, the next phone repair step is to play low-frequency sounds to help get water out of the speakers. This sound makes the speakers vibrate, which helps shake out any remaining water.
First, turn on your phone and set the volume to the maximum. Place your phone flat or on a slight incline with the speaker facing down and play low-frequency sounds. You should see water droplets coming out. Turn off the sound when the water is gone, but you can play it for a few more seconds to make sure as much water as possible is removed.
Use Silica Gel
Phone repair experts recommend silica gel for serious water damage or phones that aren’t water-resistant. It is highly absorbent and can help draw moisture away from your phone.
Make sure your phone is off and dry on the outside. Place it in a bag or container with a lid, and add as many silica gel packets as you can find. You can keep the packets intact or pour silica gel directly into the container. Leave your phone in the bag with the silica gel for 24 to 48 hours.
You might have heard of using rice to dry out your phone, but Apple advises against this method.
Contact Phone Repair Professionals
If you’ve tried all these steps and still hear crackling or muffled sounds from your phone’s speaker, it might be time to contact a service department. They may offer more tips or need to replace some components.
Final Words
Even the most durable phones can be damaged if water is left in the speaker. If your phone gets wet, be sure to dry it thoroughly and remove water from the speaker to keep it in good condition. To avoid future issues, try to keep your phone away from water. Consider investing in a waterproof speaker and keep your phone safe and dry for listening to music. If these steps do not help resolve the problem, consider getting professional phone repair services.
Frequently Asked Questions
1. How do I get water out of my phone?
To remove water from your phone, first, turn it off and remove all the accessories. Gently dry it with a towel, and let it stay in a room-temperature environment for at least 24 hours.
2. How do I fix my speaker sound?
To fix speaker sound, check if the volume is turned up and ensure no obstructions. You may restart your phone and clean the speaker area with a soft brush or cloth.
3. Can the phone speaker be damaged by water?
Water can damage your phone’s speaker by causing short circuits or rust. It’s best to keep your phone away from water and act quickly if it gets wet.